Nylon Membrane
Reinforced Nylon Membrane
Reinforced Nylon Flat Membrane is made of polyamide 66
Reinforced Nylon Flat Membrane is made of polyamide 66. It is hydrophilic in nature with good chemical compatibility. It can filter all water-based liquids and most organic solutions such as alcohols, hydrocarbons, ethers, esters, ketones, etc.
Nylon membrane is widely used for sample collection, pre-filtration, sample testing and removal of particles, bacteria and micro-organisms.
01
Naturally hydrophilic, high flow rate
02
Excellent mechanical strength
03
Very low extractable, ensuring an accurate test result
Model
Features
- Naturally hydrophilic, high flow rate.
- Very low extractable, ensuring an accurate test result.
- Good resistance to heat, cold, and oil.
- Excellent inter and intra-lot consistency
- Excellent mechanical strength.
- Better heat resistance than nylon 6.
- Resistant to various sterilization methods such as autoclave, EO, and gamma irradiation.
- *Sterilization times/doses vary depending on the customer’s processing technology and sterilization conditions, and corresponding verification is required.
Specifications
| TLNYB010270 | Type Nylon, Supported, Pore Size 0.1µm, Width 270mm, Roll |
| TLNYB022270 | Type Nylon, Supported, Pore Size 0.22µm, Width 270mm, Roll |
| TLNYB045270 | Type Nylon, Supported, Pore Size 0.45µm, Width 270mm, Roll |
| TLNYB065270 | Type Nylon, Supported, Pore Size 0.65µm, Width 270mm,Roll |
| TLNYB080270 | Type Nylon, Supported, Pore Size 0.8µm, Width 270mm,Roll |
| TLNYB120270 | Type Nylon, Supported, Pore Size 1.20µm, Width 270mm, Roll |
| TLNYB300270 | Type Nylon, Supported, Pore Size 3.0µm, Width 270mm,Roll |
| TLNYB500270 | Type Nylon, Supported, Pore Size 5.0µm, Width 270mm,Roll |
| Note: Other specifications can be customized (minimum order quantity requirements must be met) | |
Applications
Suitable for filtration applications in the fields of biopharmaceuticals, medical, water treatment, and chemical purification.
- Sterilization filtration
- Bacterial reduction filtration
- Particle and colloid removal

Pharmaceuticals

Laboratory filtration

Water treatment
Send Inquiry

Related Products
XA-Type

PES Membrane XA-Type
Features a unique hourglass-shaped cross-sectional pore structure
V-Type

PES Membrane V-Type
PES membrane is natural hydrophilic, good wettability and asymmetric pore structure
MCE Membrane

Reinforced MCE Membrane
Reinforced MCE Flat membranes are made from a mixture of cellulose nitrate and cellulose acetate with a PET support structure
PVDF Membrane

Hydrophobic PVDF Membrane
Hydrophobic PVDF membranes offer strong hydrophobicity, excellent heat resistance and chemical compatibility
Articles

News
|
17.11.2026
Radiopharmaceutical Manufacturing Solutions: 3 GMP Case Studies by Tailin

News
|
21.10.2026
Microbial Testing of Compressed Gases in Pharmaceutical Manufacturing: From Regulatory Requirements to Method Selection

News
|
18.09.2026
Containment Isolator for Crushing and Weighing: The Ultimate GMP Solution for API Production

News
|
16.09.2026


