XA Membrane
PES Type XA Membrane
Features a unique hourglass-shaped cross-sectional pore structure
The Polyethersulfone (PES) Type XA Membrane is an asymmetric microfiltration membrane featuring a unique hourglass-shaped cross-sectional pore structure. This design helps enhance safety during processing and use while maintaining filtration efficiency and
selectivity.
Its optimized pore structure enables effective bacterial retention while maintaining high flux, making the PES Type XA Membrane particularly suitable for biopharmaceutical and chemical drug manufacturing applications.
01
Hourglass-Shaped Asymmetric Structure
02
High Dirt-Holding Capacity
03
Excellent Hydrophilicity
Model
Features
- Low Protein Binding & Low Extractables
- Excellent Mechanical Strength
- High Porosity & Uniform Pore Distribution
- Exceptional Dirt-Holding Capacity
- Good Chemical Compatibility Across a Wide pH Range
- Rapid Wetting and High Flux
- Excellent Intra-Lot & Inter-Lot Consistency
- Multiple Sterilization Options: Autoclave, Ethylene Oxide(EO) & Gamma Irradiation
(Sterilization times/doses may vary depending on the customer’s processingmethods and sterilization conditions. Appropriate validation is required.)
Specifications
| TLPES010XA270 | Type PES, Pore Size 0.1μm, Width 270mm, Roll |
| TLPES022XA270 | Type PES, Pore Size 0.22μm, Width 270mm, Roll |
| TLPES045XA270 | Type PES, Pore Size 0.45μm, Width 270mm, Roll |
| TLPES065XA270 | Type PES, Pore Size 0.65μm, Width 270mm, Roll |
| TLPES080XA270 | Type PES, Pore Size 0.8μm, Width 270mm, Roll |
| TLPES120XA270 | Type PES, Pore Size 1.2μm, Width 270mm, Roll |
| Note: Other specifications can be customized (minimum order quantity requirements must be met). | |
Applications
Suitable for demanding applications in the pharmaceutical, medical, and high-purity chemical industries.

Pharmaceuticals

Laboratory filtration

Water treatment
Send Inquiry

Related Products
Nylon Membrane

Reinforced Nylon Membrane
Reinforced Nylon Flat Membrane is made of polyamide 66
MCE Membrane

Reinforced MCE Membrane
Reinforced MCE Flat membranes are made from a mixture of cellulose nitrate and cellulose acetate with a PET support structure
PVDF Membrane

Hydrophobic PVDF Membrane
Hydrophobic PVDF membranes offer strong hydrophobicity, excellent heat resistance and chemical compatibility
PVDF Membrane

Hydrophilic PVDF Membrane
Hydrophilic PVDF membranes are hydrophilic modifications of hydrophobic PVDF membranes
Articles

News
|
21.10.2026
Microbial Testing of Compressed Gases in Pharmaceutical Manufacturing: From Regulatory Requirements to Method Selection

News
|
18.09.2026
Containment Isolator for Crushing and Weighing: The Ultimate GMP Solution for API Production

News
|
16.09.2026
Tailin mRNA Drug Manufacturing Equipment & Solutions: From Laboratory to Commercialization

News
|
27.08.2026

